The InterDigital pilot demonstrates Industry 4.0 applications, such as the detection and disposal of defective products on an assembly line or the remote navigation of a vehicle within a factory. These applications are hosted at the Edge due to their low latency requirements and use a 5G network to connect to the various terminal devices, like a robot, camera, or LiDAR. The solution guarantees required high bandwidth connectivity in uplink and low latency connectivity in both uplink and downlink.
5G Edge Pilot for Industry 4.0 Applications
5G Edge Pilot for Industry 4.0 Applications
5G Edge Pilot for Industry 4.0 Applications
Presentation / Sep 2021
Related Content
White Paper /May 2025
Media over Wireless: Networks for Ubiquitous Video
Research Paper /Mar 2025
To realize the objectives of Integrated Sensing and
Communication (ISAC) in 6G, there is a need to introduce
new functionalities in 6G core (6GC) architecture that are
dynamic and resource-efficient. In ISAC, sensing signals are used by a Sensing Receiver (SRx) to measure and report Sensing Data Points (SDPs) to the network. However, a direct approach involving …
Research Paper /Mar 2025
This paper proposes a method that enhances the compression performance of the current model under development for the upcoming MPEG standard on Feature Compression for Machines (FCM).
This standard aims at providing inter-operable compressed bitstreams of features in the context of split computing, i.e., when the inference of a large computer vision Neural-Netwo…
Webinar /Jun 2024
Blog Post /Jun 2025
Blog Post /Jun 2025